Tagging management with a vlan
I switched an Unleashed setup using one vlan on the L2 level to use multiple vlans for each of the SSID's. The managed switch the Unleashed AP's are connected to are trunking all vlans to the AP's. To avoid using vlan 1 the management network and SSD are now tagged with vlan 10. Now that I switched over to this setup I am unable to get to the management IP of the Unleashed master unless I connect a device to an access port tagged with vlan 1 in the same subnet. Is there update coming to be able to place the management interface on the master on any vlan?