Documentation Downloads Knowledge How-To Hub Forums Cases Assets Warranty
Skip to main content
kevin_karch

17 Messages

 • 

260 Points

Fri, Nov 22, 2019 3:25 PM

r610 unleashed performance

What is the recommended software for r610 unleashed performance? we are getting 3-400 meg of a 1 G connection. Hardwired devices can get ~850 meg

Kevin Karch

VACK Inc

www.vackinc.com

sales@vackinc.com

Question

 • 

Updated 

9 months ago

43

4

Responses

tyler_riddle_6uo5wu5kthy0f

4 Messages

 • 

170 Points

a year ago

Performance is based on your setup/device support and interference.  I always say basically cut theoretical spec in half to get your real-world speeds.
1. Ruckus needs to be on maximum channelization (80 or 160 mhz as I'm not sure what shows up)
2. Device needs to support that Channelization with 3x3 antennas.

I would say that you will never see those speeds with most equipment and that's ok. Unless you are doing some serious file transferring, what need would you have for it at this point in time?

2

kevin_karch

17 Messages

 • 

260 Points

here is the Case# 01003536. the units only qualified for T & M support. I still think there is a solution in later releases but don't want to churn the customer though a ton of releases unnecessarily
 

Kevin Karch

VACK Inc

www.vackinc.com

sales@vackinc.com

Like

10 months ago

Brand User
michael_brado

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

Hi Kevin,
    I see, no support, but as you found we give free Unleashed firmware
that you can load, even if you only bought a Solo AP.  You didn't get to
provide details for TAC to investigate, but we have many folks here too.
    So, how many APs do you have, what kind of clients do you have, and
what are you seeing for up/down using what kind of speed test tools?  If
you only have iPhones, group sees UNL 200.6 as best up/down performance.
If you have mostly other devices, latest UNL 200.8 works well. [Note: Your
mileage may vary, physical environment affects Wi-Fi coverage, etc.]
   Oh, and as I read below that you have SZ too, are you testing the same APs
in the same locations using UNL and SZ management?  Do you see any
difference in performance across your clients?  (shouldn't be much if any)
... and how many of which model APs do you have again please?  The "issue"
is thought to only affect R710 model APs.

Like

10 months ago

0

hayward_kong

368 Messages

 • 

4.8K Points

a year ago

Kevin,

         What are you downloads when near a r610? Uploads?  What device?  What unleashed firmware are you on?

0

0

kevin_karch

17 Messages

 • 

260 Points

a year ago

200.7.10.102.64 we are set to 80 mhz on 5 G. we do see better performance with R610s on our hosted SZ controller same location w 80 and ofcourse 160 mhz channels 

Kevin Karch

VACK Inc

www.vackinc.com

sales@vackinc.com

0

0

hayward_kong

368 Messages

 • 

4.8K Points

a year ago

Right now there seems to be a bug in unleashed firmware 200.7.10.x

Firmware 200.6.10.x seems to help

please follow this discussion.

 https://forums.ruckuswireless.com/ruckuswireless/topics/slow-download-speeds-r710-unleashed

15

0

Brand User
michael_brado

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

The other thread about R710 Unleashed issue is not necessarily affecting other models.

Has anyone tested maintenance release 200.7.10.202.92 that was recently posted?

https://support.ruckuswireless.com/software/2251-ruckus-unleashed-ap-200-7-10-202-92-ga-refresh1-sof...

Like

a year ago

0

andrew_giancola

232 Messages

 • 

4K Points

Yes, I'm on it. things seem fine to me, R610 Running Unleashed.

Like

a year ago

0

hayward_kong

368 Messages

 • 

4.8K Points

I know this also impacts the R610, I know under certain conditions it impacts the R610 too..  Doesn't happen to all R510, R610, R710 users.. but does impact all 3 APs and more... I have tested all 3 APs personally... and have deployed R510, R610...

Like

a year ago

0

kevin_karch

17 Messages

 • 

260 Points

Mike Brado, Did this get corrected in a new UL release of code?

Kevin Karch

VACK Inc

www.vackinc.com

sales@vackinc.com

Like

10 months ago

0

Brand User
michael_brado

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

"this"?  I believe there is an iOS phone client (only) upload speed issue.
If you have a TAC case open, so they can understand your network and see logs from a problematic client,
it would be very helpful to detemime if your issue is similar to ER-7956.

Like

10 months ago

0

Was this helpful?