I am a (prospective) Ruckus newbie interested in the following setup with a couple of R650’s: the R650's would be connected over 2.5Gb Ethernet to a Mikrotik router 10.1.0.1 offering dhcp within 10.1.0.0/16; 10.1.0.1 is a NAT-gateway towards the Internet.
I would then like to span 3 SSIDs (each 5 and 2.4 GHz) over the R650’s:
- SSID1 should simply bridge to 10.1.0.0/16.
- SSID2 and SSID3 should be different subnets, say 10.2.0.0/16 and 10.3.0.0/16, and route (no NAT) via 10.1.0.1 towards the Internet. Access to 10.1.0.0/16 should be restriced, access from 10.1.0.0/16 to 10.2 and 10.3 should be allowed.
Can this be set up with Unleashed? What would be the preferred way: VLANs for 10.2.0.0/24 and 10.3.0.0/24 with dhcp, frewalling, etc. handled by 10.1.0.1; or SSID1 and SSID2 configured on the master R650 e.g. as Guest WLANs with local dhcp-servers and routing?
Thanks a bunch to anyone who cares to read & answer!