atma_tiwana

36 Messages

•

718 Points

Mon, Feb 8, 2021 10:42 AM

Nest Hello Issue

Hi,

I have an issue with one device that keeps randomly disconnecting and reconnecting.

The device is a Nest hello doorbell.

In the UK it only runs in 2.4ghz.

I have 2 R500's running the latest unleashed firmware.

I've disabled 2.4ghz on one of the AP's to ensure its not jumping from one to another due to signal strength .

When it was connected to my BT router had no issues.

I have created a dbg file which I can upload that was set to monitor that device via mac address.

The issue appears to be a STA-DISASSOC ?

I'vetried to post a few lines from the dbg file but every time i click on post it fails

Responses

Accepted Solution

atma_tiwana

36 Messages

•

718 Points

15 days ago

So an update.

All of a sudden it's working fine.

I changed the combined Service providers (BT) modem/ router to a Deco M5.

But changed it back because I sold it.

However having a look on the internet I think the Cold weather in the UK may have caused issues for the Nest Hello or its external PSU as others had reported similar issues.

Suffice to say it's all setup as it was when I was having problems and it's gone back to being rock solid.

Strange

eizens_putnins

289 Messages

•

4K Points

So it was at the end client device problem... Good that it fixed itself. If it will be back next winter you know what to do -- move to warmer lands...

15 days ago

eizens_putnins

289 Messages

•

4K Points

a month ago

Check that you haven't 802.11r (fast roaming) enabled in WiFi network configuration. If it is, it's most probably the reason for issues.

atma_tiwana

36 Messages

•

718 Points

@eizens_putnins Hi thanks for replying.

I have the issue with it both on and off, originally it was off so i switched it on.

It's on at the moment but the fact that only one AP out of 2 is transmitting 2.4ghz should mean that on or off it should not make a difference ?

a month ago

atma_tiwana

36 Messages

•

718 Points

a month ago

If this is of any help ?

Reason code 3 is

station is leaving (or has left) IBSS or ESS

The access point went offline, deauthenticating the client.

(edited)

eizens_putnins

289 Messages

•

4K Points

a month ago

It looks that your bell actually works on 5GHz (freq 5540, channel 108)?!

Also it seems that you have it's MAC blocked?

Check country setting (must be same on AP and client.

Check band setting on client.

Create special SSID, only on 2.4GHz, with simple (only letters and numbers SSID name and password, use WPA2/PSK)

Disable 802.11r

Check signal level.

Don't enable client isolation, as well as all limiting settings (airtime decongestion, etc.)

Check again if it works.

atma_tiwana

36 Messages

•

718 Points

a month ago

So I have my router assign the DHCP address to the Unleashed network.

When looking at setting on unleashed the current master (as I have no preferred master set) I noticed the AP was set to keep AP's setting, is this normal ? I've set it to use DHCP now as I believe that is what is should be?

eizens_putnins

289 Messages

•

4K Points

"keep AP's setting" is normal. Anyway, you have no problem with APs, you have problems with bell connectivity, so don't mess AP itself, but try to troubleshoot connection.

So the very first question - do you have any problems when connected using laptop or phone to same WiFi? If you are not disconnected, than problem is with concrete client connection, and not with AP. If you are also disconnected regularly -- then it is different story.

a month ago

atma_tiwana

36 Messages

•

718 Points

Its a client problem with the doorbell only.

However this is the only item that has a 24/7 connection and is constantly uploading as its a acting as a security camera and keeps a complete history on the cloud.

The problem could be other items as well since they connect on demand as in I want to brose the Web, stream a movie then when I'm done they "disconnect" and therefore I don't notice it.

The doorbell will disconnect and then reconnect eventually, sometimes within seconds, minutes or hours. Nest doorbell with send an email once it has been offline for 10 minutes, that's how I knew about the issue, otherwise I would be oblivious to it until I went looking for footage and noticed it was missing.

I have added all my 2.4ghz devices as favourites to ensure I get notified if any drop off the network..

Some have but they reconnect more or less instantaneously (could be dhcp lease release and renewal ?).

The nest doorbell is the only issue I have ATM

(edited)

a month ago

eizens_putnins

289 Messages

•

4K Points

Actually it is possible, that bell isn't uploading video all the time (probably works on movement detection?), so when there is nothing to upload it may be kicked out after timeout, and it connects abck when needs to transmit something? Have no idea about bell beheviour -- never have used such device. Check what is session timeout for your network, make it say 12 hours and test than.

Also, is your bell the client with lowest signal? as it is outside, and all other clients inside? Check signal level reported for it.

15 days ago

atma_tiwana

36 Messages

•

718 Points

Hi.

No I have 24/7 upload to the internet.

No weak signal either.

Next winter I'll probably have a new camera instead and a normal doorbell.

15 days ago

atma_tiwana

Nest Hello Issue

Responses

atma_tiwana

eizens_putnins

eizens_putnins

atma_tiwana

atma_tiwana

eizens_putnins

atma_tiwana

eizens_putnins

atma_tiwana

eizens_putnins

atma_tiwana

Was this helpful?