Skip to main content
S

Tue, Feb 23, 2021 2:51 AM

Is the ruckus not compatible with att router internet

Once I switch from att WiFi to ruckus there is a considerable drop in speed and devices are slow to add. Is there a better setup taking the costumer off of att wifi and reconfigureing using just the ruckus 

Responses

Official Rep

 • 

804 Messages

 • 

12.1K Points

11 days ago

Hi Sean,

Could you share the device setup or a simple diagram of your network?

Unleashed APs can be configured in Gateway mode but still you need internet connection over a Ethernet, means you need a model which can provide internet to the AP over ethernet.

I am not aware about any compatibility issues, as long as router/modem supports 1G ethernet connection.

Regards,

Syamantak Omer

6 Messages

 • 

120 Points

It’s a lennar home setup that I’m activating  the setup is router to switch to two or three 510s the problem is when I manage the setup and start adding devices like ring or a thermostat they won’t join the system. The customers were using the att as thier WiFi AP before we got there. Upon switching over to ruckus AP the whole thing slows down. Cx does a speed test and the drop is below 100 so they naturally don’t want rukus as their AP

Official Rep

 • 

804 Messages

 • 

12.1K Points

Hi Sean,

Could you provide more information about your old ATT wireless router. Like its model number.

Different product type may provide different speeds as this depends upon many factors.

Unleashed is an enterprise grade solutions and support way too many features than regular SOHO controller less routers.

To improve speed, try to use 5G than 2.4 and check how much speed deference you see. Also check how much speed you get when connected to wired network.

Regards,

Syamantak Omer