lanmastermark's profile

14 Messages

 • 

222 Points

Tue, Jul 13, 2021 4:12 PM

Configure port on Ruckus WAP R500 for alternate VLAN in Unleashed UI

I have a Ruckus R500 WAP. I'm using the wired network port on the device for a computer, but I want the computer to be on a different VLAN from the Ruckus device. I recall in the pre-Unleased UI there was a way to do this, but there is not within the Unleased UI. Can I do this via the command line, or can it be added to the Unleashed UI? Please advise. Thanks!

Responses

Official Rep

 • 

1.1K Messages

 • 

15.8K Points

15 d ago

Hi Ian,

What is the software version on your Unleashed setup?

AP port access VLAN configuration was not part of the old versions but if you can confirm the current version, I will check once.

14 Messages

 • 

222 Points

15 d ago

I believe I'm running the latest version for my WAP devices,

Current firmware version:  200.7.10.202.127

Thank you.

Official Rep

 • 

1.1K Messages

 • 

15.8K Points

14 d ago

Hi Ian,

AP port configuration option is not available on 200.7 version. Though it is supported on the latest version 200.10.

Refer the doc link below for 200.10.

https://docs.commscope.com/bundle/unleashed-200.10-onlinehelp/page/GUID-64C2EDE6-426A-4393-A9EA-940F9580A27D.html

14 Messages

 • 

222 Points

14 d ago

The document indicates that this feature is only available for the H320 and H510 models. My access points are model R500. Can you tell me if 200.10 will be available for this model anytime soon?

Official Rep

 • 

1.1K Messages

 • 

15.8K Points

13 d ago

R500 cannot upgrade beyond 200.7 as higher versions doesn't support 802.11ac Wave1 APs.

14 Messages

 • 

222 Points

13 d ago

Noted. Thanks.

Important Announcement