Skip to main content

8 Messages

 • 

210 Points

Wed, Oct 2, 2019 10:52 PM

Any way to use WEP on Unleashed?

I have a customer that insists on using WEP on their network for the remainder of the year. I have explained that it's just like leaving the network open. They don't care-- they've got some legacy equipment that will only connect with WEP, and it won't be upgraded until January 1st at the earliest. So, until then, it's WEP, and I can't change that. 

Is there any way to use WEP on Unleashed? The GUI (at least on the newer firmware versions) does not have the option. Does anyone know if it's available in an older firmware version, or via the CLI?

Responses

365 Messages

 • 

4.7K Points

a year ago

How many old equipment does your client have that uses WEP? maybe uses older Ap if they are still around?

214 Messages

 • 

5K Points

Hi Pete,

According to the online Unleashed documentation, Unleashed 200.7 supports WEP:

Open: No authentication method is used. "Open" authentication allows the use of WPA2, WEP or no encryption. Open authentication + WPA2 encryption (also known as WPA-PSK) is the most common type of WLAN encryption method and should be the default configuration if there are no special requirements for authentication or encryption.

Details here: http://docs.ruckuswireless.com/unleashed/200.7.10.102/GUID-D1AAA04C-9405-457B-95BC-7F94F59040B4.html

P.S. Enabling WEP (or TKIP) is worse that just having an open network, it effectively disables 802.11n (and better), resulting in 802.11a/b/g network performance.

HTH,
Darrel.

8 Messages

 • 

210 Points

Hayk-- It's only a few pieces of equipment. I am considering installing the new Unleashed network for everything new and then just running a separate network for the old equipment. The downside to that would be the increased interference, etc, from having 2 sets of APs. 

8 Messages

 • 

210 Points

Darrel-- Thanks. This definitely helps. I did not consider that 802.11n doesn't run on WEP, so thanks for that as well. 

8 Messages

 • 

210 Points

Darrel-- I'm actually running 200.7 right now (the newest 200.7.10.102 firmware) and the option isn't on the GUI, which is odd because I see it mentioned in the documentation like you said. In the documentation, though, it isn't shown on the GUI either. I'll see if I can find it on the CLI. If I can, I'll post back in case anyone else is looking for it. 

214 Messages

 • 

5K Points

Hi Pete,

Many thanks for the feedback.  Unfortunately it looks like there's an error in our documentation as even in the screenshot within the docs, WEP is not available as an Encryption Method.

I've also just checked on another Unleashed 200.7 system and WEP is not listed.

I'll do some more digging and let you know if I find anything.

Thanks,
Darrel.