D

17 Messages

 • 

268 Points

Thu, Mar 4, 2021 10:50 AM

Ruckus T310c Unleashed Configuration

Hello,

I was trying to configure the Ruckus AP T310c using the webpage http://unleashed.ruckuswireless.com but I cannot access the webpage when I am trying to configure.

Steps:

1 - I have made reset to factory settings the device

2 - Connected to the Ruckus AP through Wireless network (Configure-Me SSID)

3 - Enter the serial number to enter in the Wireless Network.

4 - Tried to access the unleashed.ruckuswireless.com page but can't access.

Am I missing something here or I cannot configure this AP using the Unleashed platform? 

Regards,

David

Responses

135 Messages

 • 

2.8K Points

4 m ago

Dear David,

The Unleashed AP can be accessed using its IP, please use any ip scan tool to identify the IP address of that IP and use that IP on the browser and you should be able to access the AP's web interface.

Usually you should get access to that Unleashed AP using that URL, you could use above method alternatively.

Hope it helps!!!

Regards,

Abilash PR.

(edited)

Employee

 • 

60 Messages

 • 

1.2K Points

4 m ago

Hi David,

If Configure-Me SSID is asking for a Pre-Shared Key, then it is not running on Unleashed firmware. It must be on Solo firmware. 

Check if you have received an IP address. Assign an IP in 10.154.231.0/24 subnet and try http://10.154.231.125 on HTTP and/or SSH. 

(edited)

-

HTH

Thanks

Karthik.

17 Messages

 • 

268 Points

Hello Karthik,

Thanks for the reply.

I have tried your suggestion but it seems it goes to the Standalone configuration page:

Should I do a firmware upgrade or something like this in order to get the ruckus with the Unleashed software?

Employee

 • 

60 Messages

 • 

1.2K Points

Hi David,

Yes. You are right. To use in Unleashed mode, Firmware change is required. Version 114.x is used for solo/controller/cloud deployments. For Unleashed, 200.x series firmware is required. 

(edited)

-

HTH

Thanks

Karthik.

17 Messages

 • 

268 Points

4 m ago

I will try these suggestions.

17 Messages

 • 

268 Points

2 m ago

It worked changing the firmware upgrade. :)

Important Announcement