Skip to main content

Wed, Jul 5, 2017 7:34 PM

7731 EOL but I need the new part # and information.

7731 EOL but I need the new part # and information. We currently have 7731 pushing cameras over it. Since 7731 is no longer available what is the next part to buy? will this new part work with exisiting system? If so, do I have to upgrade firmware or anything? Thank you

Responses

4 Messages

 • 

150 Points

3 years ago

Hello Mike,
901-P300-WW02 for a pair
901-P300-WW01 for a single unit

61 Messages

 • 

956 Points

3 years ago

Hi Mike,

To add more to Reuben's comment, please find the link below to download 7731 EOL document page 2.

https://support.ruckuswireless.com/documents/1021-zoneflex-7731-end-of-life-notification/download

For Product Ordering Information, please refer to P300 data sheet page 4.

http://ruckus-www.s3.amazonaws.com/pdf/datasheets/ds-ruckus-p300.pdf

Regards,
Abilash PR.

3 Messages

 • 

90 Points

3 years ago

Thank you. I'm adding a new camera to the existing infrastructure. Is it better to buy pair or single unit and point it to the existing 7731? would that work anyway?

Thanks

Mike

61 Messages

 • 

956 Points

3 years ago

Hi Mike,

Please note ZF7731 would not bridge with another P300, P300 should be bought in pairs.

Regards,
Abilash PR.

3 Messages

 • 

90 Points

3 years ago

Ok so if the existing cameras are all using 7731's. And II buy a new pair of p300's can I put a switch to share the backhaul with the existing network 7731 for the signal down to where it needs end?

61 Messages

 • 

956 Points

3 years ago

Hi Mike,

I am not aware of your Network deployment, it is best to approach Ruckus SE or your sales contact (Ruckus Partner/VAR) who should be able to advise you on this. 

Regards,
Abilash PR.