Skip to main content

1 Message


70 Points

Wed, Nov 25, 2015 4:54 AM

zf7372 firmware upgrade problem

hi. i have ruckus zf7372 and recently tried to upgrade the firmware. however, accidentally i was upgraded it with a wrong firmware and the access point now seems not working. only the LED power is ON. i tried to reset to the factory default by pressing the reset button, but no change. I ping the default ip: and no reply. need help on how to revert to the previous firmware or at least to let me logged in to the configuration interface/GUI. tq in advance.


824 Messages


13.2K Points

5 years ago

if sure that hard resetting is NOT helping then its broken. You must contact support to get it RMA;ed