Skip to main content

7 Messages

 • 

132 Points

Tue, Mar 1, 2016 8:31 AM

ZD1106 with 8 ZF7372 the AP frequently disconnect every hour

hi, i'm using ZD1106 with 8 zf7372 the AP frequently disconnect every hour.. error shows that all the AP heart beat lost.. any suggestion on this case?

Responses

824 Messages

 • 

13.2K Points

5 years ago

If all AP's are on switch, then check switch is not running into problem etc..
Check for power outages..
check in the AP support for the reason for AP reboot...

7 Messages

 • 

132 Points

5 years ago

the reason of AP reboot is " error heartbeat lost"
all the switch is running on Poe and the switch is specifically for AP only
the problem keep happening on peak hours 8 to 5 office hours.. 
i already upgrade the zd to latest version firmware..
please help.. 

824 Messages

 • 

13.2K Points

Heartbeat loss is indication of potential network issue between AP/ZD.
Ensure that during peak hours switch is NOT failling...
During peak hours, run a ping test from laptop hooked to that same switch to controller and see how things..
Upgrading will NOT help unless its determined that code is causing problem..
btw how do you recover from the issue? do you reboot switch?

7 Messages

 • 

132 Points

i recover it by reboot the ZD..
sometimes i need to reboot it 2 or 3 times to make all AP connected

25 Messages

 • 

466 Points

5 years ago

Please Mohd, are you using 1106 or 1112?

824 Messages

 • 

13.2K Points

zd1106 as mentioned in subject of the thread...

7 Messages

 • 

132 Points

i am using 1106 

129 Messages

 • 

1.6K Points

It looks like you have a building with ground floor, first floor and 2nd floor. What is the maximum and typical length of your data cabling from your AP switch to the APs?

7 Messages

 • 

132 Points

i am not quite sure, but estimate around 20 meters for each floor

3 Messages

 • 

110 Points

5 years ago

I also had the same problem using ZD3000 and T300 APs. The solution to the issue is upgrading the firmware of ZD3000 from version 9.8.3 to 9.12.2.0.101. Since your AC model is ZD1100, perhaps you can upgrade it to version 9.10.2.0.11. Good luck!

7 Messages

 • 

132 Points

thank you for the suggestion, i will try and let you know if it works

129 Messages

 • 

1.6K Points

5 years ago

Does your switch have logs?  If so, look for any PoE messages.

7 Messages

 • 

132 Points

5 years ago

i am using unmanaged switch, does it have logs?

129 Messages

 • 

1.6K Points

5 years ago

Probably not. What is the manufacturer and model of the un-managed switch? Do you have access to another PoE switch? If so, try swapping the switches and see if the Ruckus disconnect symptoms change.