Skip to main content

Wed, Oct 14, 2020 5:24 AM

Two recover.me networks

Hello,

We have a client with 10 Unleashed AP's. 8 AP's are connected and 2 disconnected but this is because they are not physically connected to the network, so that is to be expected. Currently, we are not experiencing any major issues, everything seems to be working fine. However, when I scan for networks, I do see two Recover.Me networks. The Mac addresses they are pointing to belong to two working AP's that are serving clients and are working fine.

What could be the reason for this?

Thank you,

Sjaak

Responses

Employee

 • 

633 Messages

 • 

10.3K Points

2 months ago

Hi Sureal,

Could you try to SSH into those two APs and share the output of "get wlanlist"

Logically, AP should only broadcast recover.me when it is unable to reach it's gateway IP.

Regards,
Syamantak Omer

Regards,

Syamantak Omer

16 Messages

 • 

292 Points

2 months ago

Hello Syamantak,

Thank you for your reply. Here's a screenshot of get wlanlist:



Regards,

Sjaak


246 Messages

 • 

4.2K Points

2 months ago

Hi Sjaak,

AP should only broadcast recover.me when it is unable to reach it's gateway IP.

If the APs are not having Gateway reachability issue and broadcasting the configured SSIDs, then you can disable the Recover.me SSID with the below command from AP CLI.
set state wlan102 down
set state wlan1032 down