Speed issues with Zoneflex R300
Hey Everyone,
I'm a first time poster and honestly at my wits end trying to figure out why I am having speed issues with these APs. We have 25 Zoneflex R300 AP's connecting to our L3 switch broadcasting dual channel SSIDs.
The problem we're seeing is that the AP's seems to only be connecting at about half the speed of our primary connection.
We have a 200mbps/200mbps fiber line coming in from the ISP. Direct Ethernet connections show that we're getting the full speeds to the switch. The AP's are auto negotiating at 1000Mbps at full duplex.
The devices directly connected to the AP's less then 2 feet away, are showing varying speeds.
At maximum we see 100mbps/100mbps but it varies even down to ~2mbps/2mbps. I've manually upgraded the firmware on the devices with no luck.
There is not too much EMI in the office so it wouldn't appear that the issue is interference. We also have ruled out the issue being tied to a specific PC as we've ran testing on phones and laptops. I'm typically used to using these AP's with a Zonedirector but at this time we do not have one at hand.
Anyone have any ideas?