Skip to main content

4 Messages

 • 

100 Points

Wed, Aug 30, 2017 4:20 AM

Answered

R500 standalone without Zonedirector and all controller

I would like to set up two R500 without all controller which are the smartzone or uunleashed etc. It would use the static IP and don't provide the DHCP of AP. The AP will connect to router and get the DHCP.
May i know it is possible?

Responses

3 Messages

 • 

80 Points

3 years ago

Yes you can have standalone deployment

4 Messages

 • 

100 Points

3 years ago

Thank you. I have some question , may i know R model is supported the controller , cloud and stand alone?

3 Messages

 • 

80 Points

3 years ago

Yes controller supports..you can deploy R500 in both controller mode and standalone mode

824 Messages

 • 

13.2K Points

3 years ago

as far as i know...
on cloud, only unleashed AP will connect...

"Try Ruckus Cloud Wi-Fi free for 60 days What do you get with the Cloud Wi-Fi trial?
  • 60-day trial duration to manage up to 10 access points (AP)
  • Mobile app
  • Phone, chat and forum support
  • Ruckus UnleashedTM AP*

*For qualified customers. If you need an Unleashed AP, a Ruckus Wireless representative will contact you with further details.

If you already have an Unleashed AP:

  • Follow these steps to prepare your AP to connect to Cloud Wi-Fi.
  • Have any questions about setting your Unleashed AP? Start with our quick start guide to set up your Cloud Wi-Fi network."

4 Messages

 • 

100 Points

3 years ago

I just want to use the R500 in stand alone thus Dreytek router to provide the DHCP.
The controller may not be implement in this topology.

824 Messages

 • 

13.2K Points

3 years ago

doable... standalone + drayek for NATing/DHCP... will work..
Brand User

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

Times two (2) R500s even!  Let APs get DHCP from your router. 
Find their IP address in the DHCP lease table.  Login to APs and
configure identical WLAN/SSIDs on each, clients will pull DHCP
from your router as their def-gw too.

9 Messages

 • 

182 Points

3 years ago

Just use 2x R510 unleashed. You don't need a controller. One will become the master and the secondary the slave. You only need to configure the master and the config will replicate. In addition using the latest firmware allows for a faster failover in case of a failure

Gideon

4 Messages

 • 

100 Points

3 years ago

If we don't use the unleashed, it is possible?
Just setting up the static IP only of AP thus router pull the DHCP to Wi-Fi network.

824 Messages

 • 

13.2K Points

3 years ago

yes... its possible...
Brand User

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

... the way Michael suggested (sorry I didn't throw in the Unleashed options, good point Gideon!)