petar_pisnjak's profile

3 Messages

 • 

140 Points

Wed, Jul 27, 2016 6:56 AM

Overlapped Subnet IP range

I am having problem with Ruckus R710 Subnet configuration:

I have configured Local Subnet 1 with following:

Enabled
Local IP: 192.168.40.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.40.10
Maximum DHCP Users: 240
Access VLAN: 40


When I try to configure Local Subnet 2 with following:

Enabled
Local IP: 192.168.50.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.50.10
Maximum DHCP Users: 240
Access VLAN: 50

I get message: 
Overlapped Subnet IP range

But I cannot understand why would it be? I have even tried further spread subnets like: 192.169.50.1 or something else, but still get same message...

Responses

Official Rep

 • 

327 Messages

 • 

5.1K Points

5 y ago

Hi Petar,

Which software are you running on the R710 ?

Kind regards
Martin

3 Messages

 • 

140 Points

5 y ago

Software Version: 100.2.0.0.336

2 Messages

 • 

92 Points

5 y ago

I am having same issue; On contrary R700 is stable and allow me to do this.
I think this is a bug that has been for a while in R710 and not taken care of.

2 Messages

 • 

94 Points

4 y ago

do you solved this problem ?

2 Messages

 • 

92 Points

Just updated the firmware and worked fine since then

2 Messages

 • 

94 Points

Thankyou, I upgrade to version 104.0.0.0.1347 and works excelent !

3 Messages

 • 

140 Points

4 y ago

No, changed to bridge mode so dont need it anymore

Important Announcement