Skip to main content

7 Messages

 • 

132 Points

Sun, May 17, 2020 2:22 PM

New to ZF7372

Hi, I just using ZF7372 for my Home and currently I'm using firmware 104.0.0.0.1347 (just upgraded)
I have several questions:

1. Firmware: What are the difference ZoneFlex Solo Access Point and Standalone AP Software?
I'm using this AP is just standalone. So I'm curious on "Solo" and "Standalone" word :)

2. My date can not sync to NTP (default: ntp.ruckuswireless.com)

3. Ethernet Ports :: Port 1 cannot be enabled

Any advise is really appreciated. Thank you.


Responses

365 Messages

 • 

4.7K Points

5 months ago

1) solo and standalone same thing ...I think they used solo name later at some point. 2) since the change over to Commscope. They probably forgot to port over the ntp to ruckus. You should use a different ntp server.
3) can not help you with that yet, I haven’t used a 7372 in a long time...might have to break one out of the box since a client gave me one.

7 Messages

 • 

132 Points

noted and many thanks for your insight :)
for ntp, i did use other ntp servers, but same thing, cannot update/sync :(

6 Messages

 • 

120 Points

Ran into an issue like this with my zf 7351. Use the ip address of the ntp server and it should sync.

7 Messages

 • 

132 Points

just try using ip address, still not sync :( so i'll wait for several hours then :)

6 Messages

 • 

120 Points

That's really odd. I use Google's time server "216.239.35.0", and it syncs fine.

7 Messages

 • 

132 Points

currently i'm using 216.239.35.0 too, been for a day and no change at all :(