Skip to main content

25 Messages

 • 

360 Points

Mon, Nov 9, 2015 5:44 PM

New R710 deployment problems with HP Switches entering POE+ 802.3at mode

All of our ruckus APs (R710s) are in 802.3af mode.  Every AP is connected to a POE+ port on our 5412zl switches (Capable of 37 watts per port).  In CLI on our ZD3000 we have set the lldp enable in the System Default group.  Anyone else seeing this issue?  Thank you!

Responses

3 Messages

 • 

100 Points

5 years ago

Check POE limits on HP, worked for my R710's:
Brand User

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

5 years ago

Is LLDP also configured on the switch ports?

https://support.ruckuswireless.com/answers/000005005

333 Messages

 • 

5.1K Points

Why cant knowledge articles make it in to the manuals :)

2 Messages

 • 

70 Points

Does not work with Cisco SG300 switches. I heard today that there is an AP Command to force 802.3at request from AP.

Stay tuned

3 Messages

 • 

100 Points

5 years ago

On HP-2920 LLDP is enabled by default... For the rest on config i used this KB:
https://www.juniper.net/techpubs/en_US/release-independent/nce/information-products/pathway-pages/nc...