Skip to main content

3 Messages

 • 

92 Points

Fri, Feb 3, 2017 11:36 AM

Answered

multiple R310 APs for 1 network

Hi, I would like to know if it is possible to use 4 R310 APs (in different rooms) to create 1 SSID for office employees to access the entire network and 1 SSID for guests for Internet access only. Do I need an additional ZoneDirector for this? Where can I find installation manuals for the R310? Thanks! Frank

Responses

10 Messages

 • 

274 Points

4 years ago

Hi Frank, I operate two R310 in an unleashed network at home. I've got two SSIDs: One in the intranet, one in the DMZ with one-time-passwords (valid for one day) for guests or/and unsafe devices (Smart-TV, Smartmeters etc.). It works as describe - no problems!
https://www.ruckuswireless.com/products/system-management-control/unleashed

3 Messages

 • 

92 Points

4 years ago

Thanks! Sounds like this should work. You also have 1 SSD for your intranet?  Should you install the first AP as master and the others as backup?

10 Messages

 • 

274 Points

4 years ago

SSID 1: Intranet in VLAN x
SSID 2: DMZ in VLAN y

AP 1: Master
AP 2: no special configuration

5 Messages

 • 

132 Points

How do you configurate the VLan

10 Messages

 • 

274 Points

You can do this by editing the WiFi network in the Unleashed Dashboard:

5 Messages

 • 

132 Points

Thanks, i did that, but the client does not connect.

3 Messages

 • 

92 Points

4 years ago

Thanks a lot. Sounds like this is possible without problems.

10 Messages

 • 

274 Points

4 years ago

Yes, I think so. I'm very satisfied with this solution.
Brand User

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

4 years ago

Thanks Community!
Here's the Release Notes and Firmware links for R310 Frank,
if you need to change the code they're running now.
https://support.ruckuswireless.com/documents/1295-ruckus-unleashed-200-3-ga-release-notes
https://support.ruckuswireless.com/software/1136-ruckus-unleashed-ap-200-3-9-13-228-ga-software-for-... 

Admin Guide for Unleashed 200.3 is Online: 
http://docs.ruckuswireless.com/unleashed/200.3/index.html

2 Messages

 • 

80 Points

3 years ago

Hi, 

Can anyone help to how to get enable the Access VLAN setting, need to configure two SSID (Staff and Guest with social media) on different VLANs. 

I tried doing as mention above but i m getting Vlan Access as grey and not able change VLAN 1 to my required vlan. 

below is the screenshot of the master console. 


 

please help me to resolve this issue.