Issues configuring VLANs on Single AP Deployment of 7372
As a preface, I worked with Ruckus support directly on this issue and the tech stated that my configuration looks correct and it might be the AP, but I am having this issue on another AP as well.
In short, when attempting to connect to either of the SSIDs from the AP, it sits at the point where it states "Obtaining IP Address" but the device never hands out the address.
In this environment, I have a SonicWall NSA 220 with two VLANs configured as 10 and 20. The 10 VLAN is for the corporate WIFI and is a seperate subnet from their primary subnet. The same is true for VLAN 20 as well but this is another subnet for the guest network.
DHCP is turned on on the SonicWall for both of these VLANs. The AP is connected to a 1900 series HP POE switch on port 9 which is untagged on VLAN1 (default VLAN) and has tagged memebership on VLAN 10 and 20. Then on the AP itself, obviously each SSID is specified to use the specific VLAN.
I simply can't figure out why the hell this device is unable to assign an address out from the WAP. Does anyone have any ideas or can maybe set me on the right path? Please let me know if you require more information.