Skip to main content

4 Messages

 • 

112 Points

Fri, Jul 26, 2013 4:53 AM

Answered

Installed 4 Stand Alone APs and Want to configure....

Hello we have installed 4 stand alone 7352 AP's without a Zone Director. Is there a way we can change the WPA2 password other than connecting directly to each of the APs to change the password?

Responses

17 Messages

 • 

310 Points

7 years ago

Unfortunately, there is no option to this :(

You need to connect to each AP wired/wireless to access it and get this changed.

Cheers,
Srini

683 Messages

 • 

11K Points

7 years ago

...which of course can be scripted if it's something to do frequently.

3 Messages

 • 

90 Points

Yes this is something they will want to do every 3 months...

16 Messages

 • 

442 Points

7 years ago

How about using Flexmaster via:

1. Creating an AP config template (Configure > Standalone APs > Config Template)
2. Provisioning said template via configuration task

3 Messages

 • 

90 Points

Yes but dont you have to have ZoneDirector Controller to use the Flexmaster?

21 Messages

 • 

442 Points

You can manage Standalone AP's, Zone Directors and ZF 7731 bridges by the FM. and you can create a template push the template to all connected standalone AP's at once. You can also schedule this task as per your requirements.

16 Messages

 • 

442 Points

7 years ago

In reply to Brian Bingham:
> Yes but dont you have to have ZoneDirector Controller to use the Flexmaster?

To clarify, no sir, you don't.

Thus, one answer to your question would be FlexMaster (albeit, a $1000 + a VM or server answer, not to mention added time to configure and shoot out a template).

Another, the one that Mr. Redfield mentioned, would be to script it.

I think the latter is better, but requires a programmer/scripter to build a frontend that will scrape the HTML page of each AP, then submit changes. We have done this for the guestpass creation, as in we have a web frontend that connects to several ZD's guestpass page, and "one clicks" a guestpass for Wi-Fi portal password generation. All the enduser have to do is access a single webpage, click two dropdown menus, then submit.