ASK the Pack
Tue, Feb 23, 2021 2:39 AM
I want to setup my R720 to standalone AP but the config menu is disbaled, but this AP was previously used with zone director. Hope you can help me with this. Please see the attached screenshot below.
14 days ago
Factory reset your device, after factory reset change the firmware to 100.x.x or check standalone firmware on the ruckus site.
Your AP is running ZoneDirector firmware so cannot be configured directly with WLAN (and other) details as this configuration is pushed from the controller.
As mentioned by Elvert; you will need to install (upgrade) a new firmware version on to the AP so it can operate in 'stand-alone' mode. This is either the stand-alone firmware e.g. Stand-alone 126.96.36.199 or Unleashed 200.9. Both are available on the Ruckus support site, if you have a support contract allowing you access.
Actually, the main thing is that you need to factory reset AP, when it is in status "managed by ZD", web interface is disabled. After factory reset by button it becomes available. You can configure basic things than, but it is much better to install Unleashed firmware, than you'll have much more features and even phone app for management.
How can we improve?