Skip to main content

4 Messages

 • 

100 Points

Tue, Oct 7, 2014 11:34 AM

How do I enable SNMPv3 on ZoneDirector managed ZoneFlex 7363.

I needed to enable snmp remote-mgmt.

set remote-mgmt snmp.

Now I'd like this to be executed on all the ZoneFlex's automagically. Does someone knows the fastest way to do this?

Responses

824 Messages

 • 

13.2K Points

6 years ago

Hello Rudy,

I don't have a ZD and AP to test this however there is an command which you can execute from ZD CLI and that would hit all AP's which are online. it goes somthing like this:

remote_ap_cli - A set remote-mgmt snmp

Take a look at ZD CLI guide for reference. Start at page PDF page 281

https://support.ruckuswireless.com/do...

hope this helps.

4 Messages

 • 

100 Points

6 years ago

Hi Monnat,

Thanks for your reply. We're using version 9.8.0.0 build 373.

I've been searching through this manual: https://support.ruckuswireless.com/do...

Strangely when we enable SNMPv2 the AP's enable it as well. Yet for SNMPv3 they don't.

I wouldn't be surprised if it's manageable through the web-interface, yet based on intuition I can't really find anything. I'll read the docs a bit more.

20 Messages

 • 

280 Points

6 years ago

Rudy,

You can try via remote_ap_cli -A (as Monnat mentioned above)
The command is set snmp

set snmp : set snmp {options}
->version , SNMP version(v2c,v3,both)
->system contact , SNMP V2c system contact
->system location , SNMP V2c system location
->community ro , read-only community name
->community rw , read-write community name
->trap {enable|disable}, SNMP V2c trap enable flag
->trap-svr , SNMP V2c trap server ipaddr
-- Modify SNMP Settings

Be aware you have to be in debug mode to execute the command.

Cheers.

4 Messages

 • 

100 Points

6 years ago

Victor,

That's probably why I couldn't get the remote_ap_cli to work. I weren't trying it in debug mode.

Thanks a lot

4 Messages

 • 

100 Points

6 years ago

The SNMPv3 configuration isn't persistent. After a reboot it's not active anymore. I've read the CLI reference but I can't find something about a running/startup configuration, is persistent SNMPv3 possible on ZoneFlex and ZoneDirectors?