The vSZ runs on an server with a public ip. Once a new AP is
added to the customers network with an 100.... Firmware, it cannot connect to the
vSZ via public IP.
DHCP option 43 as described in https://support.ruckuswireless.com/answers/000003197
manually add the director ip (set director ip
x.x.x.x) on the ap
but the AP doesn’t connect and/or perform no firmware
When we first connect the AP internally to the vSZ and move
the AP to the appropriate Zone, it will work at the customer ́s Network.
Did we miss something or doing it wrong?