Skip to main content

Wed, Jul 24, 2013 7:39 PM

Can't get 7982 to detect DHCP or ZD

Hi,

We have connected our 7363 APs ok but our 7982 APs don't work, they power up, solid green light, but don't DIR.

They are sitting on an HP 2920 switch pulling 4 watts power each. We only currently Have a few APs plugged in each switch for testing.

Please help. We are running v9.6 latest.

Responses

29 Messages

 • 

540 Points

7 years ago

hi Leonard,
Could you please set a static IP on the ZF7982 AP and check?
If it still fails, keep an eye on ZD DIR led status, let us know what it shows.

Slow Blink means trying to find the ZD.
Fast blink means found the ZD and AP is in the process of joining the ZD.
Static LED means that AP joined the ZD and is connected.

regards

Ramprakash

14 Messages

 • 

220 Points

7 years ago

No DIR at all on any 7982 AP

14 Messages

 • 

220 Points

7 years ago

I will check a static IP tomorrow while at work and let you know the result

17 Messages

 • 

310 Points

7 years ago

Could you please try login to the AP through CLI(SSH) and give set director ip and reboot the AP and see if it makes any difference.

1 Message

 • 

60 Points

7 years ago

sir, we have the same problem here in the philippines.
please help. we already did the suggestions above

683 Messages

 • 

11K Points

7 years ago

@Dennis - please open a support case