Skip to main content
T

Fri, Nov 27, 2020 1:20 AM

Can I get notification when an AP goes down?

I want to get email notifications if an AP goes down or overloaded with traffic. Is this feature available on Unleashed?

I thought I found it under Admin & Services->Administration->Network Management->Alarm Notification but did not work for me when I tested it. I have checked enable email server, check all alarm notifications, checked send an email message when an alarm is triggered, and did test to email address working. But when I killed power (unplugged PoE cable) to AP I do not receive any notification. However, when I powered back the AP, I did got an "AP Has Joined" email notification.

Responses

13 Messages

 • 

182 Points

2 months ago

I don't think that feature is on Unleashed.  It is however on ZoneDirector.   I've seen it work on ZD.  On Unleashed I only get it when an AP re-joins.

-------------------------------

Dave Raines

Osbee Industries, Inc.

www.osbee.com

Employee

 • 

246 Messages

 • 

5.4K Points

2 months ago

Hi Thomas,

Unleashed 200.9 (and most likely earlier versions) has the ability to send you notifications and alerts by email.

Configuration details for 200.9 here: https://docs.ruckuswireless.com/unleashed/200.9/GUID-9F0770AF-DB35-4E5D-A92B-35DD8D6DEF73.html?hl=notification

If you have configured the above but you have not recieved a notification, it is likely an issue with the SMTP server or configuration.

HTH,
Darrel.

5 Messages

 • 

112 Points

Can you try disconnecting (or unplugging power) to AP? I do not get any notification of AP going offline. 

Employee

 • 

246 Messages

 • 

5.4K Points

Hi Thomas, 


Yes, I rebooted the AP and was sent an email alert. 

Darrel. 

Employee

 • 

246 Messages

 • 

5.4K Points

2 months ago

Hi Thomas,

Zone Director is very similar to Unleashed in the level of granularity and reporting. For what you require, you'd need to look at Ruckus SmartZone plus the Ruckus Analytics platform for viewing historical usage (upto 12 months with Ruckus Analytics). 

Ruckus analytics can provide you with full usage reporting by network, SSID, AP, Radio, etc.  However it won't generate alerts, this function is part of the SmartZone features.  I have attached a link to the latest SmartZone documentation for you to review the 'Alarm and Event Reference Guide' document.

https://support.ruckuswireless.com/documents/3354-smartzone-5-2-1-ga-software-documentation-zip

I'd recommend you contact your Ruckus reseller partner for further information.

Regards,
Darrel.