Skip to main content

Tue, Jan 3, 2017 4:59 PM

Answered

AP (mesh mode) disconnected from the controller

Good morning, dear ones.I have a query on a problem with an AP in MESH

My computer was working fine, but from one moment to the other it was disconnected from the controller.

What I did at that moment was to disconnect it from power to the AP in mesh mode, and connect it to the SW that is connected the controller, and that I appear connected in the controller but no longer in mesh mode.

Then I connected it again (only power) in mesh mode. And raised the service with connectivity to the controller ..

The problem is that I repeat the times that this happens to me.

Could they help me with a definitive solution for this team, or what else could be going on?

Thanks in advance

Responses

Brand User

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

4 years ago

For definitive solution, please provide ZD or SZ logs and your Mesh AP's MAC address to Tech Support.

https://support.ruckuswireless.com/contact-us

Only the Logs can show what occured to APs or clients on the APs.