Skip to main content

9 Messages

 • 

420 Points

Tue, Oct 20, 2020 5:38 AM

hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?

hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?

Responses

Accepted Solution

Official Solution

Employee

 • 

146 Messages

 • 

2.4K Points

a month ago

Hi Claude,

This is not a supported version, You can upgrade to 08.0.90g for managing ICX switches with SmartZone.
Pls note upgrade to the UFI image from non-UFI is a two step process, Pls refer to the upgrade guide or open a tac case if you need assistance.

https://support.ruckuswireless.com/documents/2674-fastiron-08-0-90-ga-software-upgrade-guide/downloa...


Thanks
Jijo 

Employee

 • 

100 Messages

 • 

2.1K Points

a month ago

Hi Claude

What software version is loaded on the 7150? It should be 8.0.90 or later and the UFI version. If you are not sure paste the output of the show version command here.

Simon 

9 Messages

 • 

420 Points

a month ago

hi Simon,

the SW firmware version is 08.0.70dbT211;  SPS08070db.bin

 

9 Messages

 • 

420 Points

a month ago

Thanks Jijo.... let me try to upgrade.

Employee

 • 

306 Messages

 • 

4.9K Points

Hi Claude, Jijo is correct you will need a more recent version of code, and use the firmware for the switch that has the "ufi" in the filename.

Kind regards

Martin