Skip to main content

Tue, May 29, 2018 6:43 AM

Answered

How to change the vlan for LAN1 and LAN2 ports on H320

I am deploying H320 APs connected to Ruckus Cloud and can not find a way to change the VLAN used by the LAN1 and LAN2 ports.
Traffic from devices connected to these ports simply goes to the untagged / native VLAN of the AP, which is the management VLAN.

Responses

Employee

 • 

37 Messages

 • 

722 Points

3 years ago

Hi Michael,
I do believe that VLAN tagging on those ports is not currently a supported feature in the Ruckus Cloud offering.  Keep watching for updates.

It is supported with other control options such as Unleashed and Smartzone and is also supported on the H510 in Cloud as of the next scheduled release (Jun-2018).
Brand User

Former Employee

 • 

2.6K Messages

 • 

44.8K Points

3 years ago

Yes, this feature is coming in Cloud 18.01 with screen like this:



The release is still a couple weeks away, and should be completely updated by End of June.

2 Messages

 • 

84 Points

Thanks very much, Michael

27 Messages

 • 

624 Points

2 years ago

Configurable options:

·      LAN port

·      Port Type

·      VLAN untag ID/Management VLAN – 1 (mgmt. VLAN always 1)

 

Port Types:

·      Access – End users and VLAN-unaware workstations commonly reside on access links. All ports are in ACCESS mode assigned to the default VLAN (VLAN 1). Ports set to Access mode belong to one VLAN only.

·      Trunk – On VLAN trunk links, all frames must be tagged with the respective VLAN ID’s. The native VLAN must match on all switches in the segment. (VLAN 1 is default Native VLAN). The native VLAN is NOT tagged.

·      General – similar function as Trunk ports but passes only the VLAN traffic that is defined by the user.