Skip to main content

3 Messages

 • 

110 Points

Fri, Sep 11, 2015 8:54 PM

Cannot Add new AP

Under Venue, tried to add a new AP and pasted serial number into the Serial number field and would never take it. Then hand typed and it still does not take it. An Error event happens each time saying it could not add Access Point. Then I accidentally typed in the wrong serial number off 1 digit on 1 of the numbers and that Allowed it to be added. Super odd? Serial I'm trying to add is 491483802079 and MAC is F0:B0:52:24:12:30. Note that I did have it connected previously, then I just noticed it was in the Staging zone so I removed it from there and also re-tried. However, it still would not work. I keep seeing it come back to the Staging Zone so I factory reset the AP, removed from Staging, rebooted AP, waited for it to come back up, then tried to re-add to Venue, and still would not. I'll wait a bit, then there it is under Staging Zone. Arghhhhh

Responses

7 Messages

 • 

130 Points

5 years ago

I am also experiencing this inability to add the AP. I believe that the S/N needs to be released from whatever pool it fell into so we can add it into our venue. 

I believe the disconnect was during the initial add of the s/n.
I followed these steps per the PowerPoint instructions...

On the "Try Ruckus Cloud" on slide # 12 of the PPT, I input the S/N of the R600 and clicked on "Try Now" as directed.
Slide 13 says "Join Now" but as I already have a Ruckus Single Sign-On, I signed on with my credentials. 

I'm theorizing that the S/N is stuck in another limbo land Venue and needs to be released.
Any thoughts?

40 Messages

 • 

968 Points

While Eng is doing an investigation where the AP might be landing, was the AP already connecting to the cloud before? If so, the AP keeps memory of hte last cloud instance it was connected to. Even if the cloud resgistry has the cloud info for that AP, the AP tries the last one it was connecrted to and if successful, stays there. Just to tell AP to forget, if you can factory reset the AP (pressing the physical reset button on the AP for 10seconds will do) and let us know, that will be great. 

cheers
Phal

3 Messages

 • 

110 Points

Phal, I set factory on the AP and also did a 20 second pin hold to reset on the AP and still comes into the Staging Area of the vSZ-H controller. From the Cloud UI, I cannot add it to the Venue. Details are:
S/N - 491483802079
MAC - F0:B0:52:24:12:30
Zone/Tenant - 00150000015yAZrAAM

40 Messages

 • 

968 Points

How did you confirm (or get access) to the staging area of vSZ-H controller? Kumo hides any access to underlying vSZ controllers? I guess providing some screenshots might help?

7 Messages

 • 

130 Points

5 years ago

S/N 131533102678 
MAC 94:F6:65:17:A3:60
R600 provided by Ruckus

7 Messages

 • 

130 Points

5 years ago

I also factory reset my Ruckus provided brand new R600 with the unleashed_R500_R600_200.0.9.9.483.bl7  firmware already installed and reattempted to add the AP into the Venue unsuccessfully. Same result "Could not add access point, please try again". I can't add any serial number, even an incorrect one.

40 Messages

 • 

968 Points

Hi Brian,
Pls share your email address that u used for login.
thanks
Phal

7 Messages

 • 

130 Points

40 Messages

 • 

968 Points

ok, we got the root. We have a bug. Currently, if you are using your verified VAR email (that you use to login to Ruckus Support account), we are hitting a bug of not being able to assign you trial licenses for cloud. We will fix this. 

For now, could you log out of all Ruckus support logins (use a new browser e.g.) and use a separate personal email to create a trial account? That should go through properly and you would be able to start your trial. we have 10 AP licenses assigned per trial account.

We aim to fix that bug in about 2-3 weeks (hopefully sooner) when we roll out the next beta. 

Thank you for your help and patience as we go through the beta.
thanks
Phal

7 Messages

 • 

130 Points

5 years ago

I couldn't create a venue, until I logged out then back in again. Seems to be working now.

4 Messages

 • 

110 Points

5 years ago

What is the status on this bug with Ruckus Support logins?  Not able to add AP to the Cloud AP beta Venue.  AP has been hard reset.

Website:  https://donatello.ruckuswireless.com/#/ruckus/venues/myvenues  Username:  [email protected]  AP-Name:  R600-94f6650cdff0  AP-SN:  971553704084  AP-MAC:  94f6650cdff0 

Edit:  Status seems to be good.  A venue must be created first prior to adding the AP.  Once the venue existed, the AP added.