ASK the Pack
Fri, Jul 16, 2021 12:48 PM
Hi, we acquired this AP model (R320) and configured it with a POE injector.I made the initial settings as per the manual and it's working.But how do I manage it without having to disconnect the LAN port of the POE injector?
15 d ago
You must have created an SSID on this AP or connected the AP to the switch.
There are two ways.
1. Connect any device on the wired network, which is in the same IP subnet as the AP and you should be able to access the AP.
2. The SSID you created on this AP, connect the client on it and then access the AP over the wireless.
How can we improve?