Skip to main content

4 Messages

 • 

104 Points

Mon, Aug 21, 2017 4:45 AM

Answered

SWITCH Configuration

I am using CISCO SG300-10P POE model.
I want to know How to do DHCP SCOPE  on this model in CLI mode.
I just see steps in internet But it's not working on this particular switch.
So helpme to configure this.   

Responses

302 Messages

 • 

4.8K Points

3 years ago

Hi Prabaharan,

For Cisco products please contact Cisco Support.

If you have any question on your Ruckus product we can assist you.

Kind regards
Martin

4 Messages

 • 

104 Points

3 years ago

ohh hoo!

thankyou martin :)
Brand User

2.6K Messages

 • 

44.8K Points

3 years ago

I had eleven years at Cisco, mostly in Tech Support and the SG300 was never popular in-house!
But if it has semi-IOS, you may be able to configure your DHCP with something similar to this old
example I've kept around... (and pulled out the option 43 that pointed an AP to a controller). 
It will reserve the low end for static IP assigned server/PCs on the wire, and assumes your ISP router
address is .254 in the scope.  You should be able to do something similar with your network range.
With best regards.

!
ip dhcp excluded-address 30.20.0.1 30.20.0.10
ip dhcp excluded-address 30.20.0.254
!
ip dhcp pool ap-pool
   network 30.20.0.0 255.255.0.0
   default-router 30.20.0.254
   dns-server 25.0.0.1
!

4 Messages

 • 

104 Points

 Thankyou   Michael 


But it's not working. I am a Beginner, Is this Right??
Brand User

2.6K Messages

 • 

44.8K Points

Nope, apparently the SG300 is not running regular/full IOS. Look for a Cisco manual on it I guess.
Brand User

2.6K Messages

 • 

44.8K Points

Nope, apparently the SG300 is not running regular/full IOS. Look for a Cisco manual on it I guess.

4 Messages

 • 

104 Points

3 years ago

 Thankyou   Michael 




But it's not working. I am a Beginner, Is this Right??