Skip to main content

23 Messages


392 Points

Thu, Aug 16, 2018 2:46 AM


Web GUI over rj45 management port only

Is it possible to allow web GUI access only through the management port? Im running an ICX 7150 24P.



9 Messages


346 Points

2 years ago

Hello Fernando

Is not possible to configure web management access only through the management port.

Is possible to set a VLAN or specific ports to be able to access but not the management port specifically on this case.

An option could be to create a management VLAN and assign a port or ports to it and use them only for management access.

The options you have to configure web management access is as follows:

"web-management enable { vlan vlan-id | ethernet unit/slot/port [ to unit/slot/port | [ ethernet unit/slot/port to unit/slot/port | ethernet unit/slot/port ] "

For example to enable it of r a specific VLAN:
"web-management enable vlan 10"

- For a specific port: "web-management enable Ethernet 1/1/1"

-For a group of ports: "web-management enable Ethernet 1/1/1 to 1/1/5 "

I hope this information is usseful.


23 Messages


392 Points

2 years ago

Thank you!