Skip to main content

4 Messages

 • 

100 Points

Wed, Sep 25, 2019 9:16 AM

License Activation

we upload -2X10G-LIC-POD ,  Before we installed two 10G license and activated only one port.. now we are not able to activate the second port. kindly support us

Responses

100 Messages

 • 

2.1K Points

a year ago

Hi Ahmed

Please can you provide some more information;
Model of switch
Software version
show license output from the switch 



4 Messages

 • 

100 Points

a year ago

hi simon 

Model of switch : 7250 
attached is Software version  and show license output from the switch 

100 Messages

 • 

2.1K Points

a year ago

Hi Ahmed

On a 7250 with a 2 port PoD license ports 1/2/1 and 1/2/3 will be 10G capable. You should be able to set the speed with the speed-duplex command.

The show pod command will help you see which ports are licensed for 10G

4 Messages

 • 

100 Points

a year ago

hi semon thank you for your support 
Enquiry :  we run speed-duplex command on port 1/2/4 , but still we receive a message  No license present for port . is that what u mean 

100 Messages

 • 

2.1K Points

a year ago

Only 1/2/1 and 1/2/3 can be configured as 10G with a two port license, this is why you see an error for 1/2/4. With an 8 port license all ports would be configurable as 10G.

4 Messages

 • 

100 Points

a year ago

hi simon thank you very much