Skip to main content

1 Message

 • 

70 Points

Fri, May 17, 2019 6:30 PM

Answered

is there a way to see/log MAC address table activity and history?

I use Brocade ICX 6450 switches and sometimes my end-users will unplug devices, move them to different ports and so on

 

it would be helpful to have a log of port and MAC address activity/changes. Is it possible?

Responses

232 Messages

 • 

4K Points

2 years ago

we chased this rabbit a few weeks ago. use 802.1x or NAC to control and log.
https://www.ruckuswireless.com/products/software-and-saas/cloudpath
I edited this and added Ruckus's security offering.

Employee

 • 

129 Messages

 • 

46 Points

2 years ago

Support - 1-855-782-5871
https://support.ruckuswireless.com/contact-us

Employee

 • 

146 Messages

 • 

2.4K Points

2 years ago

Hello Jerry,

Here is a sample config and its output.


The following example enables notification of MAC address moves and sends an SNMP trap when any MAC address moves to a different port five times in a 10-second interval.

CX6430-24 Switch(config)#mac-movement notification threshold-rate 5 sampling-interval 10

ICX6430-24 Switch(config)#show notification mac-movement threshold-rate 

Threshold-Rate Mac Movement Notification is ENABLED

Configured Threshold-Rate : 5 moves

Configured Sampling-Interval : 10 seconds

Number of entries in the notification table : 0

MAC-Address    from-Port    to-Port           Last Move-Time   Vlan-id
-------------- ---------    -------           --------------   -------