Skip to main content

6 Messages

 • 

200 Points

Fri, Nov 9, 2018 3:22 PM

error invalid input when trying to create ve interface

I'm getting the error invalid input when trying to create ve interface
Firmware version :  SPR08061c

I have created a VLAN , added an untagged port to created VLAN .
When trying to create a routing interface 'router-interface ve 100' I'm getting the following error :

"error - IP routing, vrf, ip policy, route-only, rpf-mode or ip-mac was configured on ports  1/1/10"

Responses

Employee

 • 

125 Messages

 • 

2.4K Points

2 years ago

Something under interface 1/1/10 is probably stopping the configuration. Can you post "show run int e 1/1/10"?

Support - 1-855-782-5871
https://support.ruckuswireless.com/contact-us

6 Messages

 • 

200 Points

2 years ago

Solved. It was an ip addr set on interface 1/1/10
All works now

Thanks