Skip to main content

1 Message

 • 

70 Points

Thu, May 25, 2017 1:36 PM

Lutron RadioRa 2 Main Repeater Connectivity Issues

Hello All,


I am experiencing an issue with multicast traffic pass-through when connected wirelessly to my Ruckus system. The software I am using is RadioRa2 and we use this software to identify the Main Repeater on the network. The software sends out a multicast message to search for the MR. When I'm hard wired into the network it finds it every time. But if I'm connected wirelessly it will not even find it.

A very basic Ruckus setup. ZD1200 with 2 R500's. 


Any suggestions?

Responses

Brand User

2.6K Messages

 • 

44.8K Points

3 years ago

Ruckus has a directed-multicast feature that will by default, convert the first 5 multicast (UDP) clients into Unicast (TCP) for better delivery.
This is usually optimal for many applications, but not all.  In your case, you probably want to let all multicast join/updates to flow unchanged.

KBA-4568 might be the most helpful to determine which WLAN you're using these clients on, and how to disable directed-multicast and
either enable or disable IGMP snooping (try disabled first, meaning let the pkts go clear to the client, don't have AP answer on their behalf).
https://support.ruckuswireless.com/answers/000004568

[ this article may not appear until the next Support site 6hr update period, as I just opened the visibility to public. ]