I recently segmented one of my client's network into multiple VLANs. Everything is working great except for the one building that is connected to the network via point-to-point wireless with two 7731 bridges. We used HP Procurve switches for this project. All switch to switch interfaces(or trunk interfaces for the Cisco faithful)are tagged with each VLAN so that all VLAN traffic is passed. All switch ports with connected Ruckus APs are tagged for their respective VLAN.
My problem is that I don't know how the interfaces that the two bridges connect to should be configured. I treated the link as a trunk and tagged each switch port that the root and non-root bridges connect to on each side. All locally connected clients on the far end can obtain an IP address in the correct VLAN so the link works. However, I can not get the far end AP that is behind the non-root bridge to locate the Zone Director. The switch port the AP connects to is also tagged. The AP model, if it matters, is a 7762 outdoor AP. Any suggestions?