Skip to main content

388 Messages

 • 

5.9K Points

Fri, Nov 11, 2016 5:35 AM

Answered

What means number of Airtime in AP managed SZ100?

Hi everyone.

We are doing POC for multicast streaming with R710 managed SZ100.

We wonder what means number of airtime for AP managed SZ100.

We typed "get airtime wlanxx"

it issued the follwowing msg,

rkscli: get airtime wlan32
Raw counters:
Total:        830      33E
Busy:           0        0
Tx:           700      2BC
Rx:           130       82
OK

What mean the number above?

In Tx, what means 700?

Plz let me know about it.

Thanks.

Responses

Brand User

2.6K Messages

 • 

44.8K Points

4 years ago

These are packet counters.  Tx = transmit, Rx = receive, Busy = interference.

You have very clean air to show no busy packets.

Learn more from KBA-3320: What can cause Stuck Beacons and High Airtime utilization

https://support.ruckuswireless.com/answers/000003320

388 Messages

 • 

5.9K Points

Hi Michael.

700 is 70.0%? or 700%? or 700 packets?

388 Messages

 • 

5.9K Points

4 years ago

If it is 700 equal 700 %, what mean it?
Brand User

2.6K Messages

 • 

44.8K Points

packet counter, not percentage
do you have problems?
to test multicast POC, disable directed multicast on the WLAN, and be sure your network is setup for multicast routing correctly.

388 Messages

 • 

5.9K Points

4 years ago

Hi Michael.

Customer want to know that.

In SZ100, that shows as 70%.

But in ap, that shows as 700.



Additional question, why must directed multicast disable?

I thought it must eable because it increase capacity as fast speed like unicast.

We work multicast POC with disabling directed multicast and enabling directed multicast.

We found that when it enables directed multicast, multicast streaming performance is good.

Test devices was about 30-40.

Regards.
Brand User

2.6K Messages

 • 

44.8K Points

Please take up your design questions with your local VAR or Ruckus SE.