Skip to main content

25 Messages

 • 

420 Points

Thu, Jul 16, 2020 9:51 PM

Answered

MESHED NET

Good afternoon
A query from a Ruckus Root team or the main one, or master, my question is can I radiate several meshes, and each mesh connects to another mesh team, in the whole bay there are 2.5 kilometers and each Access point between them would be 50 to 60 meters Now there are 4,000 people per day that pass through that place, at some points if there are about 300 to 500 people connected at an access point.


I cannot wire more than the first Access Point.


 


Or what suggestion would you give me for this project

Responses

Employee

 • 

604 Messages

 • 

10K Points

4 months ago

Hi Chava,

You didn't mentioned what controller you are using to manage these APs. Could you confirm the controller name and version running on it.

All Ruckus controllers support mesh feature and once it is enabled on controller, any AP provisioning with controller will get the mesh SSID configured automatically.
You don't need multiple mesh SSID as single SSID will be used by all the Root APs(RAPs) and Mesh APs (Maps).

You should not considering going beyond two mesh hops because with each mesh hope, throughput will degrade by half than the last mesh/root throughput.

For example: AP1 (Root AP/RAP/Wired AP) <<>> AP2 (Mesh AP/MAP) <<> AP3 (MAP) <<> AP4 (MAP)...and so on.

Regards,
Syamantak Omer

Regards,

Syamantak Omer