Looking for a WiFi to Ethernet bridge.

Question

I have a device far from an IDF that needs an IP.  Looking for a WiFi to Ethernet bridge.  Can I connect a 7372 AP to a wired 7762 via mesh and then use the 7372 to give out an IP?  Using a ZD1200 controller.

john_dong · Answer

Yeah, that would work. All Ruckus AP's by default (mesh and non-mesh) will bridge their ethernet ports to the access VLAN. You can indeed use a ruckus mesh AP as a wifi to ethernet bridge.

vic_lazzarevich · Answer

I experimented by meshing the 7372 with an R500 and plugged my laptop into the 10/100 port on the 7372 but got no IP from DHCP.  Did not think to try a static IP on the laptop and checking for internet connectivity.  Should DHCP work on the laptop?

dave_watkins_7458248 · Answer

I've done this before with R600's. My AP's all have their ports set to trunk mode so you either had to set one of the ports on the AP as an access port with a VLAN, or have your client tag outbound packets. From the ZD you can configure the ports on the AP's and set one as an access port with a VLAN set

vic_lazzarevich · Answer

Have been off site for a few days.  Will look into AP ports later today.  My wifi network does not run on default VLAN 1 so all my switch ports are tagged.

john_dong · Answer

Yeah, then you wanna double check the settings and make sure you've set the port on your AP to be an access port with the correct VLAN ID

david_henderson_7033756 · Answer

This product works greathttp://www.silexamerica.com/products/connectivity-solutions/device-networking/ethernet-to-wireless-b...

dellcustomerservice · Answer

Wifi speeds are faster across the board and wireless connections are more reliable than ever. Wifi has become very important for us. For more details visit Mozilla Firefox Support

vic_lazzarevich

Looking for a WiFi to Ethernet bridge.

Responses

john_dong

vic_lazzarevich

monnat_systems

kiran_sha

dave_watkins_7458248

vic_lazzarevich

john_dong

david_henderson_7033756

dellcustomerservice

Was this helpful?