We are currently using only non-DFS channels (36, 40, 44, 48, 149, 153, 157, 161, and 165) in our Ruckus deployment. With only 9 channels to choose from in 5GHz we hard coded our channel width to 20MHz.
At some point in the future we may jump to 40MHz or even 80MHz wide channels which would necessitate using DFS channels. If we did jump all the way to 80MHz wide channels my understanding is this would still be dynamic with clients negotiating the best width on the fly with 80 being the max but clients could choose 40 or even 20.
I want to test whether in our geographic area, DFS is a problem. Here is my plan:
- Take 4 Ruckus R710 APs and pin them to channels 52, 56, 60, and 64
- Let them run for a period of time on these channels
- Look at log files to see if there were channel changes due to DFS
- Pin the same 4 APs to channels 100, 104, 108, and 112 and repeat the test
- Pin the same 4 APs to channels 116, 120, 124, and 128 and repeat the test
- Finally, pin the same 4 APs to channels 132, 136, 140, and 144 and repeat the test
- Is this a sound test methodology?
- How long should each test run? My understanding is a channel change could be caused by weather radar or airport radar. These types of radars operate a lot so I was thinking two full days for each of the 4 tests would be adequate
- Where exactly would I look to see if there was a channel change due to DFS? We use a Ruckus Virtual Smartzone controller. Do we look on the controller or each AP?