CLI - View clients and rates

Question

Hi! On a R500 with 100.1.0.0.194, is there a CLI command to view associated clients and their MCS rates?

michael_brado_86aa90 · Answer

Yes, try 'get station' with the following options.

get station [list|info|stats] {all|}
Options list: List stations associated to the WLAN.
info: Display station information.
stats: Display station statistics.
Example rkscli: get station wlan8 list
ADDR AID VLAN CHAN RSSI IDLE CAPS STATE HTCAPS
00:22:fb:ad:1b:2e 1Y 1 44 43 0 ESS PRIV SHTSLT QOS HT
OWL 40MHz SGI20 SGI40 GFLD MAXMSDU RSN AES AES PSK WME
OK
rkscli: get station wlan8 info
MAC Addr AID Rate RSSI VLAN Idle ERP State Flags
---------------------------------------------------------
00:22:fb:ad:1b:2e 1 6M 43 1 0 0 a2b 0
OK
rkscli: get station wlan8 stats
(null): 00:22:fb:ad:1b:2e
rx_data_frm 213148 rx_mgt_frm 10749 rx_bytes 81983195
rx_wepfail 1 rx_unencrypted 1
tx_data_frm 205015 tx_mgmt_frm 5392 tx_bytes 135092365
tx_assoc 1 tx_auth 1

samuel_eng · Answer

Thanks for your reply! How do I interpret '6M' rate?

michael_brado_86aa90 · Answer

That's 6mb data rate, implys OFDM modulation, so at least an 802.11g/n capable client.

samuel_eng · Answer

Ok, what about MCS index, modulation type, data rate in Mbit/s?

michael_brado_86aa90 · Answer

We've documented some of that in our Knowledge Base.https://support.ruckuswireless.com/answers/000004046

samuel_eng

CLI - View clients and rates

Responses

michael_brado_86aa90

samuel_eng

michael_brado_86aa90

samuel_eng

michael_brado_86aa90

Was this helpful?