Documentation Downloads Knowledge How-To Hub Forums Cases Assets Warranty
Skip to main content
mourad_haddouche's profile
mourad_haddouche
75 Points

2 Messages

 • 

80 Points

Thu, Feb 13, 2014 10:59 PM

how to create different SSID with different ISP

Hi, i have 2 SSID: Corporate SSID & Guest SSID.
we have asked to use a new ISP for Guest access and not let them use this one, when an employee connects to corporate ssid the zone director must redirect him to corporate network and when a guest connect to Guest SSID ZD have to redirect him to the second ISP router but he cannot see the corporate network.
we have 6 ZD7363 and ZD1106.
the APs are connected to one switch HP1910 24G PoE and we have trunk port with HP 1910 for private network in case corporate . my question is: is it possible to have this configuration and how to setup AP and ZD. if you need further information , please let me know. thank you for your help

Question

 • 

Updated 

7 y ago

3

3

Responses

primoz_marinsek

Champion

 • 

368 Messages

 • 

5.6K Points

7 y ago

All the segregation will be done on wired side. ZD will not direct any data traffic what so ever as all the traffic will bypass it by default.

You just need to setup your VLANs on APs propperly. So under the Config :: WLANS :: Advanced settings you need to input the Guest VID in the VLAN and the Corp VID for the Corp WLAN

If don't quite remember my HP switches now, but either all VLANs are segregated by default or none are and you need to setup some ACLs on them.

0

0

mourad_haddouche

2 Messages

 • 

80 Points

7 y ago

thanks for the reply, but what about ip address for both SSIDs , guest and corporate acces share the same APs but with different IP and connected to different DHCP ?

0

0

rahul_koul

82 Messages

 • 

1.2K Points

7 y ago

Hi Mourad,

As Primoz mentioned, most part of the configuration will be done on the wired network.

And about your last reply...the guest and corporate users will get Ip address based upon the VLANs that they are part of. Please ensure to connect the APs to Trunk ports tagging the VLANs you want for the SSIDs. Also, I think it will easier to have two different IP scopes on the same DHCP server instead of having two DHCP servers which may need more configuration.

HTH,
Rahul

0

0

Was this helpful?