Migration ZD to Cloud

Hi BBI,

We have some collateral to help you plan a ZD to Ruckus Cloud migration.  The first thing to check is whether your APs are compatible.

I hope the resources below are useful:

• KB article to migrate ZD APs to Cloud. https://support.ruckuswireless.com/articles/000008371
• APs supported in Cloud: www.ruckuswireless.com/cloud-devices
• “How to” ZD APs to Cloud: https://support.ruckuswireless.com/articles/000008371

Cloud APs run SmartZone firmware, so there will be a re-flash of firmware to the APs at some point in the process.

Best regards,
Darrel.

Hi BBI, 
It is a good plan to consolidate your sites into a single dashboard and Ruckus Cloud would be able to do that for you. Good news is the APs you have are supported in Ruckus Cloud today. Full supported AP list is here.  

Can you send us an email to [email protected]? We will have the right folks to get you some options for migration. Long-term, we are definitely looking at the "easy" button. 

thanks
Phal

https://support.ruckuswireless.com/articles/000009636


How to migrate from ZD to Ruckus Cloud?

 

Basic Recipe for migration 

Step1: First thing to check is if customers access points are supported in Ruckus Cloud Wi-Fi. Fortunately it is a simple task. Take a look here fo rall APs supported by Ruckus Cloud.

Step 2: If APs are supported, prepare a list of AP serial numbers.

Step 3: Create a Cloud account for customer.

Step 4: Import APs to Ruckus Cloud.

Step 5: Use migrate option in ZD to point APs to Ruckus Cloud.


Step 6: Verify that APs are in Cloud.

Step 7: Complete configuration. This can happen any time after step 2.

Thanks for your answer!
Everything is clear to me instead of Step 5, which migrate option do you mean?

Thanks for your answers! Against the guidelines our APs which were connected to our ZD seems to connect to the cloud without a reflash wihth the single AP firmware.
I disabled the DHCP vendor option for ZD discoveryin our AP management network, set the AP manually to default settings and it connected to our cloud demo controller. The only problem which seems to stay is to set the AP to default settings, maybe i can do this via SSH in order to not be physically at each of our 350 APs.