Hi, I was looking at options on unleashed on my R500 and saw Transmit power was set to auto. But according to the link below it should not be in Au

Hello! I want to upgrade our 5.1.2 2xvSZ+2xvDP to 5.2.1 latest. But I found from SZ-5.2.1-UpgradeGuide-RevA-20200731.pdf on page 23 this note: "For

Hi, When i have a range of AP's on a zone director 1200 ,the zone director flashes the firmware, to match the ZD. So Which set of SNMP files do i us

Hi Sir,I have topic here. I have a question in my mind. The question is without wireless controller can configure wifi mesh ? Thank you.

Once I switch from att WiFi to ruckus there is a considerable drop in speed and devices are slow to add. Is there a better setup taking the costumer o

Hey Everyone, Per the R750 PoE+ power spec I shouldn't be seeing this issue either. I have heard others say they are using a 60W PoE injector. Us

I just purchased a new construction home and the builder has installed a Ruckus system that includes two Ruckus r320 wireless access points. The maste

I have an R510 that was originally Unleashed, then flashed to run on my Cloud WiFi network and have now removed the unit from the network.  I'd like t

I have a Ruckus ZD1200 with 60APs license, I need to get another ZD as Redundancy for controller.  It will be in Active and Standby ModeDo I need to j

What exacly cause ZD failover.. Recenly they swing each other 2018/12/03  07:57:27High [Smart Redundancy] Peer ZoneDirector[10.253.1.1] connected, sys

We have 3 Zoneflex r500. I can see 2 of them in the unleased interface, and hope to add the 3rd.  The 3rd is on the same subnet, but I can't fin

Has anyone seen the issue with the Loopback on VSZ Highscale running at 100% utilization?

I have an R510 with firmware 114.0.0.0.1360 connected to our VSz controller (VMWare) The VSz and all the other APs are version 5.1.2.0.373. The new AP

We have a large campus network: ZoneDirector ZD1200, ± 50 AP's R500 and R510, ± 100 Apple TV's, lots of iPads (1:1 and shared iPads). The Apple TV's a

New to Ruckus and working on a deployment for a hotel/resort property. We've gotten reports of connectivity issues with the POS system that runs on iP

I have a ZD1200, as soon as power is applied, the STATUS and POWER led is solid green. I can't find on the network and factory rest don't work. What s

Please modify your code to have two separate alert functions for rogue vs. malicious rogue AP's. I currently have my vSZ 5.2.0.0.699 configured to em

Hi, I have a M510 managed by SZ connected only with the LTE Uplink, it works fine using the function of NAT&DHCP in an open WLAN or with a WPA2 SS

Ruckus REJECTS us to install the Firmware version that was released while under active support.Ruckus further REJECTS to give us the link to their own

Hello, I have a rather embarrassing problem that I can't solve. My goal is the following: I want to make my Wi-Fi AP 2 SSIDs on 2 different VLANs. I