We have installed ZoneDirector and 8 7942 APs (so far). I got a map of the facility and converted all three floors to JPG, then read them into ZD. I then added the APs to the map. When I look for the rogue devices, it seems that they are 180 degrees off (in the ones that I’ve been able to track down. Is there any way to turn the APs on the map so that the rogues are displayed in the correct location?

sxfo, first of all, the ZD is not aware of the orientation of the APs. The icon (graphics) is always the same for each type of AP. However, you can rotate the map. Have you tried that? In the top-right corner of Monitor —> Map View you will find a green rotating arrow. Click on it and the mouse pointer will change. Now drag the mouse across the screen.

Sometimes it may be necessary to temporarily remove the APs from the map, then rotate the map and place the APs back. To remove an AP, click on the red cross in the top-right corner (not the one to close down your browser!). Your mouse pointer will change. Now click on an AP and it will move to the left side (marked with a ‘?’). After rotating the drawing, pick&place the APs on the map.

Ruckus Support