I have a ZD1006 that I need to use inside a “192.168.x.x” subnet but I want to be able to remotely connect to it for support. Is there any provision to have one of the ZD1006 ports connect to the “192” subnet and have the second port connect to a private IP for admin access only?

pkp, the ZD ports will automatically inherit the VLAN/IP configured through the WLAN configuration. Select Configure—> WLANs, edit one of the existing WLANs, open the Advanced Options at the bottom. If you do NOT configure any VLANs, all wireless user traffic will exit the ZD untagged on the (native) VLAN the ZD is connected to.

Long story short, you cannot configure one port of the ZD to belong to only one VLAN, but perhaps there is a trick you can use: create a new SSID, call it eg AdminAccess (you can make it hidden), configure authentication/encryption so only you can connect to it, configure the VLAN tag in the Advanced Options, leave the other SSIDs as they are today, connect one of the ZD ports to a switch which supports VLAN tagging and connect your Remote Access device to that switch (or configure VLAN tagging on the Remote Access device). Be aware wireless user traffic on the other SSIDs will also exit the port connecting to the Remote Access device.

Ruckus Support