Hello,

i have a simple question.

i have a zoneflex 2925 in the center of the building and added a 2925 LMG to extend the range, is it possible to extend the range with another 2925 LMG behind the existing 2925 LMF?

old situation

DSL —zonedirector 1000-12 -—zoneflex 2925 —- zoneflex 2925 LMG.

New situation

DSL —zonedirector 1000-12 -—zoneflex 2925 —- zoneflex 2925 LMG —- zoneflex 2925 LMG.

greetings

Adriaan

Adriaan, the LMG will only connect to a wired AP, so an LMG will not connect to another LMG. In other words, we only support one (1) hop with Lite Mesh.

Ruckus Support

Hello Again,

There are 5 ethernet ports on the back of the LMG, is it possible to connect a 2925LMG to one of these port’s to extend the range.

greetings Adriaan

Adriaan, the wireless clients connecting to the LMG and wired clients connecting to the LMG’s Ethernet port are “on the same side”. The product was designed to forward all the user traffic wirelessly to the upstream AP. What you are trying to do is this:

AP))) ((([up]LMG1[down]))) (((Clients
.................|
................LMG2[down]))) (((Clients

As you can see, LMG2 has no upstream (wireless) connection. I beleive it will be easier to connect a standard 2925 (not the LMG flavor) to the wired port of LMG1. Be aware this is all experimental and is certainly not a standard recommendation. We will be releasing our Full Mesh implementation in the near future which allows multiple hops between the wired AP and the Mesh APs. My advice is to wait for that.

Ruckus Support

Hello again,

can you give a time span for that , my distributer said it would be around end april starting may, is this correct ?

greetings Adriaan

Adriaan, questions about new features cannot be answered through the Forum. Please direct these to your distributor or to the Ruckus salesforce.

Ruckus Support