Hi, i have a seriously problem with Ruckus MF2900 AP.

When i open my browser and write the address for connect to control pannel (http://192.168.0.1), recive an error message “the page cannot be found”.

Please help me Tnx Marco

Not sure if you have changed the IP address on your PC to an address on the 192.168.0.x subnet or not. All the MF2900 documents are located at http://support.ruckuswireless.com/documents/for…

I Have readed the guide of mf 2900 but i not resolved my problem.

Ip of my pc is: 192.168.0.155 subnet is: 255.255.255.0

Help me please

Hello, Did your 2900 come from an ISP who may have pre-configured the IP address on the unit? If this is likely you should contact the company that supplied the device to you. If this is not the case, then please reset the unit to factory defaults and try again. To reset the unit, with the power connected, please use a paperclip to depress the reset button for 8 seconds, the reset button is located on the rear of the device – it is behind the small hole on the far right. Regards Ruckus Wireless Technical Support

thank for the support i have resolved the problem.

Regards Marco